SMART WDC Series Technical Specifications:

PID temperature control in heating and cooling operation
Hose breakage and leak monitor
Sensor failure monitor
Stainless steel tanks and heaters
magnetic pump
Direct cooling system
Water level sensor measured via electrode
automatic water supply
Safety thermostat
acoustic alarm
Solid State Relay

Options:

Liquid flow rate control
Pump options
external sensor
Process temperature return indicator
Interface TTY 20mA, RS485
Analog signals input / output 4-20mA
0-10 volt signals

WDI Water Models

Max. Temperature Level 90⁰C and 120⁰C

Heating Powers: 6 - 9 - 16 kW

Cooling Power: Direct cooling

Pump Pressure: 2.5 bar

Pump Power: 0.5 - 1.0 kW

Pump Flow: 200 lt/min

Touch Screen Features and Control

PID control, ON/OFF control at 4 points
Temperature ramp in heating and cooling
Temperature control with external thermocouple, Type Pt1000
Heating with solid state relays
Auto Tuning
Pump pressure gauge
Return temperature indicator
Safety thermostat
Temperature and pressure graphs with file download option
Pump On / Off digital input
Secondary setpoint or forced cooling digital input
Analog outputs 4..20mA process and return temperature
Analog input 4..20mA Setpoint value
Language selection
Display in degrees Celsius / Fahrenheit. Bar / Psi. lit/min. / gallon/min
Control of equipment via VNC application
Save and load settings
alarm relay
Acoustic / visual alarm
alarm history
Configurable relays
Return pressure gauge (pressure units)
power cord

Options:

Serial interface TTY, RS485, RS232, Can Bus Profinet, Ethernet, OPC UA
frequency pump
Process flow screen
Interconnection with flow monitoring equipment
Return pressure gauge